Synthesis of Polysubstituted Symmetrical BODIPYs via Fischer Carbene Complexes: Theoretical,Photophysical and Electrochemical Evaluation

A series of new symmetrical highly substituted BODIPYs 6 a – l was synthesized through a prefunctionalization approach in 35 %–89 % yields from the pyrrole core. This strategy allowed modulation of the substituents at the different positions based on the choice of Fischer's alkynyl carbenes, oxazolones and aldehydes used as precursors. The substituent variation at positions 2, 6, 3 and 5 had the greatest effect on the modulation of their photophysical properties such as absorption (λ_abs) and emission (λ_em) wavelengths, extinction coefficient (ϵ), quantum yields (ϕ), Stokes shifts (Δν), fluorescence decay, radiative (k_rad) and non-radiative (k_nr) constants and the CIE 1931 coordinates. Theoretical calculations allowed to corroborate the effect of the substituents of meso-position on the modification of the dihedral angles. Cyclic voltammetry studies revealed that the BODIPY series presents similar redox potential behavior, being electrochemically active even in successive cycles, which suggests that transport by diffusion is the dominant process.     

The effectiveness of the organosolv process in wheat straw delignification optimizing temperature and time reaction

Cellulose - The present study investigates the organosolv treatment of wheat straw, for the optimization of cellulose delignification, which will serve as raw material for the paper industry. The...     

Lanthanide SMMs Based on Belt Macrocycles: Recent Advances and General Trends

Enhancement of axial magnetic anisotropy is the central objective to push forward the performance of Single-Molecule Magnet (SMM) complexes. In the case of mononuclear lanthanide complexes, the chemical environment around the paramagnetic ion must be tuned to place strongly interacting ligands along either the axial positions or the equatorial plane, depending on the oblate or prolate preference of the selected lanthanide. One classical strategy to achieve a precise chemical environment for a metal centre is using highly structured, chelating ligands. A natural approach for axial-equatorial control is the employment of macrocycles acting in a belt conformation, providing the equatorial coordination environment, and leaving room for axial ligands. In this review, we present a survey of SMMs based on the macrocycle belt motif. Literature systems are divided in three families (crown ether, Schiff-base and metallacrown) and their general properties in terms of structural stability and SMM performance are briefly discussed.     

The Generalized Hölder and Morrey-Campanato Dirichlet Problems for Elliptic Systems in the Upper Half-Space

Potential Analysis - We prove well-posedness results for the Dirichlet problem in $\mathbb {R}^{n}_{+}$ for homogeneous, second order, constant complex coefficient elliptic systems with boundary...     

金属Al背电极二维AZO光栅的制备和陷光特性

研究了背电极金属Al膜上二维ZnO:Al光栅的制备及其反射光谱特性.在厚度为300 nm的Al膜上溅射80 nm ZnO:Al薄膜,旋涂AZ5206光刻胶,用波长为325 nm的激光进行光刻制作光栅掩模.采用溶脱-剥离法在Al衬底上制备周期(624~1250 nm)和槽深(100~300 nm)可独立调控的ZnO:Al二维光栅.表面形貌采用原子力显微镜和扫描电镜观察,反射光谱用带积分球的分光光度计测试,双向反射分布函数用散射仪测量.结果表明,300 nm Al膜上织构二维ZnO:Al光栅背电极结构,当光栅槽深为228 nm,周期从624 nm增加到986 nm时,背电极总反射率、漫反射率以及雾度均随光栅周期增大而显著增加,而当周期从986 nm增加到1250 nm时,总反射率、漫反射率以及雾度略有增加.双向反射分布函数测试结果进一步证实了上述实验结果,即随着周期增大,漫反射峰值越大,衍射峰个数也增多.提示背反电极上槽深为228 nm、周期为986 nm的二维ZnO:Al光栅具有较好的散射效果,其中漫反射占总反射的百分比为45%.     

乙基苯胺的转动光谱及分子结构

本文使用傅里叶变换微波谱仪研究了乙基苯胺类物质(邻乙基苯胺，间乙基苯胺，对乙基苯胺)的分子结构. 由于此类分子含氮原子(I¹⁴N=1)，因此跃迁谱线中都呈现出核四级裂分. 通过比较实验测定得到的分子结构，可总结苯胺环上不同位置乙基的取代对氨基及分子整体结构的影响.     

Li+,Bi3+掺杂对Lu2O3∶Ho3+,Yb3+粉体发光性质的影响

采用高温固相法制备了Li+、Bi3掺杂Lu2O3∶Ho3,Yb3粉体.用X射线衍射仪分析了合成粉体的微结构,用场发射扫描电子显微镜观测了样品的形貌及尺寸,用紫外可见近红外荧光光谱仪分析了合成粉体的上转换发射光谱以及能级寿命.结果 表明:Li+、Bi3掺杂的Lu2O3∶Ho3,Yb3粉体,仍然保持Lu2O3立方相结构.Li+或Bi3掺杂后,合成粉体的分散性更好,颗粒更均匀,且更加接近球形,LI+掺杂后粉体颗粒尺寸明显增加.用980 nm激发,4;Li+或1.5; Bi3+掺杂后,合成粉体中Ho3的绿光光强分别提高了约3.9倍、2.8倍.随着Li+浓度的增加,合成粉体中Ho3的5S2能级寿命先增加后减小;随着Bi3浓度的增加,合成粉体中Ho3的5S2能级寿命逐渐减小.     

两例Ni(Ⅱ)/Cu(Ⅱ)配位聚合物的合成、晶体结构及热稳定性研究

在溶剂热的条件下,合成了两例金属-有机配位聚合物:{[Ni(H2O)2(1,3-BIP)2]·TFBDC}n(1)和{[Cu3(H2O)4(1,3-BIP)6]·(BTC)2·(H2O)15}n(2)(1,3-BIP为1,3-二(咪唑)丙烷,H2TFBDC为2,3,5,6-四氟对苯二甲酸和H3BTC为1,3,5-均苯三酸),并利用红外光谱、元素分析和X-射线单晶衍射等技术手段对其结构进行了表征.X-射线单晶衍射结果表明配位聚合物1呈现一维环形链构型,并通过分子间氢键作用进一步连接形成三维超分子网络结构.配位聚合物2呈现出(4,4)拓扑的二维层状结构.此外,研究了两例配位聚合物的热稳定性能.